TECHNICAL SPECIFICATIONS
Model OPP – SW-66 | Model OPP – PW-67 | |
---|---|---|
BATTERY OPERATEDLuggage Package Wrapper |
CURRENT OPERATEDLuggage Package Wrapper | |
Overall Dimensions | Length 70″ – 177 cm Height 49.5″ – 125 cm Width – 30.5″ – 77.5 cm | Length 70″ – 177 cm Height 49.5″ – 125 cm Width – 30.5″ – 77.5 cm |
Maximum Load Size | Diameter 50″ – 127 cm (diagonal) | Diameter 50″ – 127 cm (diagonal) |
Weight capacity | 250 pounds – 113 kg | 250 pounds – 113 kg |
Utilities | 2 x 12 VDC Battery (24 V) Operated with Fully Automatic Battery Charger 110V or 220-240 AC, I PH, 50/6OHz | 110V AC, I PH 60Hz OR 220-240 AC, I PH, 50Hz |
Turntable Drive Guides (holders) | 8″ x 20″ – 20.3 cm x 50.8 cm | 8″ x 20″ – 20.3 cm x 50.8 cm |
Turntable Drive | Direct Guides Drive (no chains or sprockets!) Heavy Duty 1/2 HP, DC Motor Drive 0-25 RPM Variable Speed Drive Motor Direct Reducer Table Drive (no chain to grease or adjust tension) Electronic Soft Start and Torque Limiting System Positive Turntable Alignment | Direct Guides Drive (no chains or sprockets!) Heavy Duty 1/2 HP, Motor Drive 0-25 RPM Variable Speed Drive Motor Direct Reducer Table Drive (no chain to grease or adjust tension) Electronic Soft Start and Torque Limiting System Positive Turntable Alignment |
Control Features | DIGI-TECH Digital Interface with Microprocessor Control Center – Touch Pad with Digital Display 4 Mode Wrap Selector with Foot Switch for Continued Operation with Incorporated Digital Counter for Each Cycle or Revolution User Friendly Controls End of Cycle Film Force Release Electronic Film Corner Compensation for Uneven Loads | DIGI-TECH Digital Interface with Microprocessor Control Center Touch Pad with Digital Display 4 Mode Wrap Selector with Foot Switch for Continued Operation with Incorporated Digital Counter for Each Cycle or Revolution User Friendly Controls End of Cycle Film Force Release Electronic Film Corner Compensation for Uneven Loads |
Film Delivery | 30” (76 cm) film AND 20″ – 50.8 cm (Easy Adjustment) Q-XL STRETCH Film pre-stretch carriage Pre-stretch Ratio up to 350% – Standard 260% Easy Thread Film Loading Adjustable film Tension Control on the Panel Full authority Film Dancer Bar with Variable Speed Output Heavy duty 1/2 HP, DC Variable Speed Drive Motor TWO ROLLS OF FILM CAPACITY INSIDE THE MACHINE | 30” (76 cm) film AND 20″ – 50.8 cm (Easy Adjustment) Q-XL STRETCH Film pre-stretch carriage Pre-stretch Ratio up to 350% – Standard 260% Easy Thread Film Loading Adjustable film Tension Control on the Panel Full authority Film Dancer Bar with Variable Speed Output Heavy duty 1/2 HP, Variable Speed Drive Motor TWO ROLLS OF FILM CAPACITY INSIDE THE MACHINE |
Structural Features | Rigid Steel Construction Frame Easy Access to All Components Open Mechanical Design for Ease of Maintenance Heavy Duty Casters | Rigid Steel Construction Frame Easy Access to All Components Open Mechanical Design for Ease of Maintenance Heavy Duty Casters |
Shipping Weight ~425 kg (air) CRATE DIMENSIONS 195x84x146cm WEIGHT 770 lbs – 350 kg | Shipping Weight ~425kg (air) CRATE DIMENSIONS 195x84x146cm WEIGHT 750 lbs – 340 kg |
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Baggage Wrappers FEATURES
Model OPP – SW-66
OPP SW-66 is a batteries operated wrapping machine. It operates on two (2) heavy duty, 12 Volts, car batteries, up to 24 hours between the charges. The machine has an included charger. In case of a requirement of 24/7 continued operation, we recommend having 2 additional spare batteries that are charged when the machine operates on the charged batteries.
Model OPP – PW-67
OPP PW-67 is a current operated machine that requires easy access to the current outlet. It is available in 220-240 V, 50 Hz or 115-120 V, 60 Hz (no additional charge).
We recommend this machine:
To the very busy airport or places,
To the airports or places where access to the power supply is limited or interruption in availability of electricity is a possibility.
We recommend this machine:
To the airports or places where access to the power supply (110V or 220V) is easy.
To the airports or places where the machine operates in one designated space or in more spaces but with easy access to the wall outlet.
The machine has a space for two (2) rolls of power stretch film that can be changed without leaving the place.
The machine has heavy duty casters for easy moving around the airport or the place of operation.
Speed of wrapping
The speed of the wrapping depends on many factors such as:
Type and number of wraps selected;
Size and shape of the luggage;
Experience of the operator.
We consider that 2 full baggage wrapping per minute is possible to attain but not if the luggage is extra-large and/or of unusual shape. The number of RPM is up to 25 which mean you can wrap one baggage 25 times per minute.
Counters and wrap cycle selector:
Both machines are equipped with electronic four Mode Wrap Selectors and with the Foot Switch for Continued Operation with Incorporated Digital Counter for Each Cycle or Revolution.
Standard Three position Wrap Cycle Selector Switch can be set so the machine wraps automatically baggage at 3 wraps (revolutions), 4 wraps (revolutions) and 3 and 3 wraps (revolutions). The 3&3 works in the following manner: 3 wrap and stop and after the baggage (parcel) is turned on the other side another 3 wraps. Different number of wraps can be
ordered. The Machines have standard Foot Switch for continued operation.
All positions have separate electronic counters inside the touch pad panel so daily activity (number of baggage or packages wrapped) can easily be counted. There is one counter that is non-resettable, so the operator cannot change the number of baggage wrapped.
Optional Cash register
We do not provide cash register due to various requirements in different parts of the word. Any preferred and acceptable type of cash register can be easily installed on top of the machine by the user. The monitoring of the baggage wrapped is done through the wrap counters (see above) so the amount of money collected is easy to verify.
Moving of the machine
All machines have heavy duty castors for easy moving from place to place.
Colour
Silver-grey is a standard colour but other colours (extra charge) can be offered on request.
Noise level
Depends not so much on the machine, but on the film quality and atmospheric conditions. We expect it to be lower than 60 db.
Power consumption:
OPP SW-66 consumes around 200-400 Watts – only when charging the batteries.
Power consumption:
OPP PW-67 consumes around 1000 Watts when operating. It switches off automatically at the end of the cycle and uses some 2-5 Watts of electricity.
Power input:
It is your option as to the current used. 115-120/1/60 20 amp or 220-240V/1/50 10 amps.
Film:
The machines are prepared for use of 20″ and 30″ (50.8 cm and 76 cm), standard core, rolls of film. Inside the machine there is a hinge that can be easily adjusted to change the film from 20” to 30” and vice-versa. In both machines interchangeable use of film is standard without additional charge.
The machines use high quality power stretch film, preferably one side cling (stretchable to 340%). The use of film varies upon the dimensions of the luggage wrapped and number of wraps (minimum 2 recommended).
Where available we recommend 30″ – 76 cm film from 17 to 23 microns (depending on the quality of film). It speeds up the wrapping of the baggage and allows easier wrap of the large loads. It also cost between 10 and 20% less per wrap than wrapping with 20″ – 50.8 cm film. If no 30″ film is available 17 to 23 microns film will work as well as the wider film.
From the experience of our customers one roll of film (30” – 76 cm) wraps between 500 – 750 average sized suitcases and it costs between 10 -20 cents US for a complete wrap. The prices of film depend on the oil prices since the film is made from oil – currently around 70-80 USD per roll of 1830m, 30”, stretchable to 4800 m.
We can provide machines with lower stretch (e.g. 200%). However, the lower stretch means higher costs of wrapping. From our calculation machines with 200% stretch will cost ~ 2,500 USD per year MORE in extra costs of film in medium use operations as compared to 260%!
Delivery delays:
The lead time is between 7 – 30 working days, unless we have the machine(s) in stock.
Operation:
No special skills are needed to operate the machine.
The terms of payment:
100% before shipment. You can inspect the machine(s) before shipment, in Montreal.
Warranty
OrionPP provides a 3 years / 5 years / 10 years warranty from delivery date of its products to be free from defects in materials and workmanship as described below. This warranty assumes that normal service will be performed by the user. Structural components manufactured by OrionPP are warranted to be free from defects in material and workmanship for a period of five (5) years and all other components for a period of 3 years from date of machine shipment. During the warranty period OrionPP will, at its option, either repair or replace any failed component. See the Important exclusions below.
Components not manufactured by OrionPP specified by the customer to be other than Orion standard brand are warranted by OrionPP to the extent that they are warranted by manufacturer or OrionPP’s supplier of these items.
All polyurethane pre-stretch rollers carry a 10 year warranty and are guaranteed to be free from defects in material and workmanship, and to perform to OrionPP standards in OrionPP film delivery systems which have been properly maintained. Rollers, shafts and cores are not warranted against physical damage, corrosion, abuse, or negligence. Wear parts such as e.g. belts, fuses, rubber rollers, light bulb, circuit breakers, brakes, motor brushes, slip ring brushes, etc. are excluded from this warranty.
Damage in transport
Damage in transport is the responsibility of the carrier and is not covered under our warranty.
Important exclusions
EXCEPT AS STATED HEREIN, ORIONPP MAKES NO OTHER WARRANTY, EXPRESSED OR IMPLIED AND IN NO EVENT, SHALL BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. ORIONPP MAKES NO WARRANTY AS TO FITNESS OF THE EQUIPMENT FOR PARTICULAR PURPOSE. ORIONPP NEITHER ASSUMES NOR AUTHORIZES ANYONE ELSE TO ASSUME FOR IT, ANY OTHER OBLIGATION OR LIABILITY RELATING TO ITS EQUIPMENT. THIS WARRANTY DOES NOT APPLY TO DAMAGE TO EQUIPMENT WHICH, IN THE JUDGMENT OF ORIONPP, HAS BEEN SUBJECT TO INCORRECT VOLTAGE SUPPLY, NORMAL WEAR AND TEAR, TO MISUSE, NEGLECT, OR UNAUTHORIZED REPAIRED OR ALTERNATIONS BY UNAUTHORIZED PERSONNEL. REPLACEMENT PARTS ARE SUBJECT TO NORMAL PRICE PAYABLE IN ADVANCE OF THE SHIPMENT. DEFECTIVE PARTS MUST BE RETURNED TO ORIONPP, FREIGHT PREPAID WITHIN 14 DAYS OF SHIPMENT OF THE REPLACEMENT PART TO THE CLIENT. DEFECTIVE PARTS MUST BE RETURNED IN THEIR ORIGINAL STATE. DEFECTIVE PARTS THAT HAVE BEEN DISASSEMBLED, DAMAGED DURING REMOVAL, OR OTHERWISE TAMPERED WITH WILL NOT BE COVERED UNDER WARRANTY. ORIONPP’S SOLE OBLIGATION UNDER THIS WARRANTY WILL BE TO PROVIDE REPAIRS TO COMPONENTS OR REPLACEMENT PARTS, F.O.B. ORIONPP’S POINT OF SHIPMENT AND/OR REFUND OF MONEY PAID IN ADVANCE FOR A PART THAT IS DECLARED FAULTY AND NOT RETURNED TO THE USER. ALL ASPECTS OF THE ABOVE STATED WARRANTY AND PROCEDURES RELATED TO ORDERING PARTS UNDER WARRANTY WILL BE UPHELD WITH NO EXCEPTIONS.