Dynamic Line
Fully automated, conveyorized stretch packaging systems
Mach 1’s DYNAMIC automatic stretch packaging systems are the perfect solution for higher production rates with around the the clock operation. These conveyorized systems can be customized and implemented as stand alone or in-line with endless configuration possibilities. Our engineering capabilities can provide an infinite list of optional features for specific applications or load types. With quality components and heavy duty construction, the DYNAMIC line of automated systems is your ultimate solution for long term reliability and lowest cost of operation.
LOAD SPECIFICATIONS | RTX | RT | TTX |
---|---|---|---|
Maximum Load Size | 48″ x 48″ Standard Larger Optional | 48″ x 48″ Standard Larger Optional | 48″ x 48″ Standard Larger Optional |
Maximum Load Height | 84″ Standard, Up to 110″ Optional | 84″ Standard, Up to 110″ Optional | 84″ Standard, Up to 110″ Optional |
Maximum Load Weight | 5,000 lbs Standard 6,000 lbs Optional | 5,000 lbs Standard 6,000 lbs Optional | 5,000 lbs Standard 6,000 lbs Optional |
Production Capacity | Up to 80 loads per hour | Up to 45 loads per hour | Up to 45 loads per hour |
FILM PRE-STRETCH FEATURES | RTX | RT | TTX |
Power 250% film Pre-Stretch | Standard | Standard | Standard |
Film Capacity | 20″ Standard, 30″ Optional | 20″ Standard, 30″ Optional | 20″ Standard, 30″ Optional |
No Contact Film Tension Sensor | Standard | Standard | Standard |
Corner Compensation | Automatic, X-Stretch system | Automatic, X-Stretch system | Automatic, X-Stretch system |
Easy Thread Film Threading | Standard | Standard | Standard |
MACHINE FEATURES | RTX | RT | TTX |
Arm / Turntable speed | Up to 30 | Up to 24 | Up to 16 |
Arm Brake | Standard | Optional | N/A |
Arm Support | 24″ Ring Gear | 14″ Ring Gear | N/A |
Turntable Home Position Lock | N/A | N/A | Standard |
Film Carriage Drive | Dual Chain | Single Chain | Single Chain |
Short Load Capabale | Standard (12″ min.) | Standard (12″ min.) | Standard (12″ min.) |
Hot Plate Film Cutter | Standard | Standard | Standard |
Standard Voltage | 240 VAC / 3 ph / 60 Hz | 240 VAC / 3 ph / 60 Hz | 240 VAC / 3 ph / 60 Hz |
Standard Air | 4 CFM @ 80 PSI | 4 CFM @ 80 PSI | 4 CFM @ 80 PSI |
CONVEYOR FEATURES | RTX | RT | TTX |
Roller Spacing | 3.5″ Standard, 2.75″ Optional | 3.5″ Standard, 2.75″ Optional | 3.5″ Standard, 2.75″ Optional |
Roller Bearing Type | Ball Bearing with Cast Iron Bolt-on Flage | Ball Bearing with Cast Iron Bolt-on Flage | Ball Bearing with Cast Iron Bolt-on Flage |
Between Frame width (BFR) | 52″ | 52″ | 52″ |
Top Of Roller Height | 18″ Standard, Other Optional | 18″ Standard, Other Optional | 18″ Standard, Other Optional |
Conveyor speed | Adjustable 20 to 60 FPM | Adjustable 20 to 60 FPM | Adjustable 20 to 60 FPM |
CONTROL FEATURES | RTX | RT | TTX |
Micro controller | Allen Bradley MicroLogix | Allen Bradley MicroLogix | Allen Bradley MicroLogix |
Touch Screen interface | Allen Bradley PanelView 600 plus | Allen Bradley PanelView 600 plus | Allen Bradley PanelView 600 plus |
Motor Control | Allen Bradley PowerFlex | Allen Bradley PowerFlex | Allen Bradley PowerFlex |
Control Panel Cabinet | NEMA12 | NEMA12 | NEMA12 |
System modes | Manual, Automatic, Automatic Pass Through | Manual, Automatic, Automatic Pass Through | Manual, Automatic, Automatic Pass Through |
Film force control | Adjustable, Automatic Tension Release at Beginning And End of Cycle | Adjustable, Automatic Tension Release at Beginning And End of Cycle | Adjustable, Automatic Tension Release at Beginning And End of Cycle |
Independent Top/ Bottom Wrap Count | Standard | Standard | Standard |
Independent Film Up/ Down Speed | Standard | Standard | Standard |
Manual Wrapper Controls | Standard | Standard | Standard |
Manual Conveyor Forward/ Reverse Jog | Standard | Standard | Standard |
Conveyor Speed Adjustable | Standard | Standard | Standard |